Albrecht DR 460-W Manuel D'instructions page 48

11 Turning on the DR 460-W
To turn on the DR 460-W for the first time:
1. Plug the supplied power adapter in a power outlet.
2. Connect the power adapter to the DC power jack on the rear panel
3. Connect RCA cables to your existing Hi-Fi stereo.
11.1 First time configuration
The first time the DR 460-W is powered on you have to choose the language first:
Use the up/down navigation buttons on your remote control to choose your preferred
language and press OK.
Then choose whether or not the DR 460-W should enable "Check network when power
on" Use the left/right navigation buttons to choose and press OK. If you enable this option
the radio will check if there are networks which the radio already knows. If that is not the
case the radio will display a list of all networks available.
Choose how you wish to configure your network.
If Yes was chosen first find your SSID on the list shown on the screen and press ok.
03:00
English
Deutsch
Español
< 1/6
00:00
Enable ' Check Network
When Power On ' ?
YES NO
00:00
Would you like to
Configure Network now ?
Yes (W PS)
YES NO
>
11