Delivery Scope; Declaration Of Conformity; Noise/Vibration Information - Bosch GHA FC2 Professional Notice Originale

OBJ_BUCH-2307-003.book Page 8 Wednesday, September 21, 2016 12:09 PM
8 | English
Symbol Meaning
Always wear ear protection.
Wear safety glasses/goggles
Movement direction
Reaction direction
Next step of action
Prohibited action
Hammer Drilling
Switching On
Switching Off
Low speed/impact rate
High speed/impact rate
Right/left rotation
Tool holder
U Rated voltage
E Impact energy per stroke according to
EPTA-Procedure 05/2009
n Rated speed
n Impact frequency at rated speed
S
Concrete
Ø Drilling diameter, max.
Weight according to EPTA-Procedure
01:2014
Audible engagement (multiple)
* Value dependent of the battery pack
being used
L Sound power level
wA
L Sound pressure level
pA
a Vibration total value
h
1 609 92A 2N9 | (21.9.16)
Symbol Meaning
K Uncertainty

Delivery Scope

Hammer adapter with auxiliary handle.
Application tools and other accessories shown or described
are not part of the standard delivery scope.
A complete overview of accessories can be found in our ac-
cessories program.
Intended Use
The power tool (GSR 14,4 V-EC FC2/GSR 18 V-EC FC2 with
GHA FC2 hammer adapter) is intended for hammer drilling in
concrete, brick and stone.
The GHA FC2 hammer adapter must be used only with the
GSR 14,4 V-EC FC2 and GSR 18 V-EC FC2 cordless
drill/drivers.
Technical Data
The technical data of the machine are listed in the table on
page 129.

Declaration of Conformity

We declare under our sole responsibility that the product de-
scribed under "Technical Data" is in conformity with all rele-
vant provisions of the directives 2009/125/EC (Regulation
1194/2012), 2011/65/EU, until 19 April 2016:
2004/108/EC, from 20 April 2016 on: 2014/30/EU,
2006/42/EC including their amendments and complies with
the following standards: EN 60745-1, EN 60745-2-6,
EN 50581.
Technical file (2006/42/EC) at:
Robert Bosch Power Tools GmbH, PT/ECS,
70538 Stuttgart, GERMANY
Henk Becker Helmut Heinzelmann
Executive Vice President Head of Product Certification
Engineering and PT/ECS
Manufacturing
Robert Bosch Power Tools GmbH
70538 Stuttgart, GERMANY
Stuttgart, 01.01.2017

Noise/Vibration Information

The measured values of the machine are listed in the table on
page 129.
Sound emission values determined according to
EN 60745-2-6.
Vibration total values a (triax vector sum) and uncertainty K
h
determined according to EN 60745-2-6.
Bosch Power Tools