Publicité
Les langues disponibles
Les langues disponibles
5. Installation and use
5.1 Safety instructions
DANGER ELECTRIC SHOCK!
- Don't let the power supply cord touch hot parts
- Don't let the power supply cord along a table or a counter
- The appliance must be connected with a single-phase socket in conformity.
- Before any installation check all the electric cables or piping
WARNING !
Operating the blade is very sharp and can cause severe lacerations ! To avoid injuries and
burns do not use the appliance if it is damaged. Do no use spare parts not provided with
your appliance
DANGER ELECTRIC SHOCK !
In the event of bad installation, the appliance can be dangerous and cause injuries. The electrical
safety of this appliance is ensured only if it is correctly connected to an efficiently earthed system
in accordance with electrical safety regulations. The appliance must be unpacked entirely before
the connection.
5.2 Installation and use
WARNING !
Installation and maintenance must be only carried out by qualified technician.
Installation and use :
-
Remove all protective foils and packaging material prior to usage. The appropriate site for the
installation of your appliance is a dry, well-ventilated room (temperature range from +5°C to
+32°C.
-
Place the appliance on a flat, solid, and heat-resistant surface. Never install your appliance on
inflammable surface.
-
Do not install the appliance near open fireplaces or all hot sources.
-
The table top supporting the appliance must be at 80cm from the floor
-
The plug must be protected by a circuit breaker of 16 A. Connect the appliance directly to a wall
plug socket. The use of adaptors, multiple sockets and/or extensions is not recommended.
-
Leave place around your appliance to operate on a secure way. You must be standing up to use the
All manuals and user guides at all-guides.com
19
Publicité
