Zyxel PLA-450 Guide De Démarrage Rapide page 4

4 Use the included power cord to connect the POWER
socket to an appropriate power source. This is also your
powerline connection.
1.1 Lights Turn On
• Power (
• HomePlug (
• WLAN (
• LAN (
If a light does not turn on, check your
connections. If this doesn't help, disconnect the
PLA-450 from its power source, wait for a few
seconds and reconnect it.
): blinks until the device is ready.
): other HomePlug AV device(s) detected.
): the wireless LAN is on.
): the connection to your computer is OK.
ENGLISH
4