LG F1 F6RDS2 Serie Manuel D'utilisateur page 25

Option Cycle
Time Delay
You can set a time delay so that the washing machine
will start automatically and finish after a specified time
interval.
1
Press the Power button.
2
Select a washing programme.
3
Press the Time Delay button and set time required.
4
Press the Start/Pause button.
NOTE
• The delay time is the time to the end of the
programme, not the start. The actual running time
may vary due to water temperature, wash load
and other factors.
Turbo Wash™
Adding the Turbo Wash™ option to normal cycles
reduces cycle time while providing the same wash
performance.
1
Press the Power button.
2
Select a washing programme.
3
Press the Turbo Wash™ button.
4
Press the Start/Pause button.
NOTE
• The option uses the Twin Spray and Optimization
features of the washer to save time without
sacrificing performance.
Steam
Steam Wash features enhance washing performance
with low energy consumption.
Refresh cycle reduces creases in clothes.
1
Press the Power button.
2
Select steam course.
3
Press the Steam button.
4
Press the Start/Pause button.
Steam Wash
• For heavily stained clothes, underwear, or baby
clothes.
• Refresh cycle is always Steam Wash.
• Do not use Steam Wash for delicates such as wool,
silk, and easily discoloured clothes.
Extra Rinse
Used to additional rinse, which may assist in removing
traces of detergent residue.with low energy consumption.
1
Press the Power button.
2
Select a washing programme.
3
Press the Extra Rinse button.
4
Press the Start/Pause button.
NOTE
• By selecting Extra Rinse function, the rinse time
and the rinse water are increased.
25