Elta 2311 Mode D'emploi page 14

All manuals and user guides at all-guides.com
02-2311-EN 12/2/05 11:09 AM
MP3/WMA Memory
Up to 20 tracks can be programmed for disc play in any order.
Before use, be sure to press "STOP" button.
1. Set "CD/MP3/WMA" mode.
2. Press the "PROGRAM" button, the display will show "P01", moreover, it will indicate program no. and digits for track no.
3. Select a desired track by using the skip buttons.
4. Press the "PROGRAM" button again to confirm desire track into program.
5. Repeat step 2 and 3 to enter additional memories into the program.
6. When ALL the desired tracks have programmed. Press "PLAY/PAUSE" button to play the disc in the order you have
programmed.
7. Press "STOP" button twice to terminal program play.
Operating USB
1. Switch to "USB" mode, unit will turn "ON" automatically.
2. Plug a USB mass storage device (e.g. memory stick) into the USB connector.
3. Press "PLAY" button Disc titles will play automatically.
4. Stopping play.
Press "STOP" button once to stop play.
• If you press the "PLAY" button again, play starts automatically from first track.
Skip and Searching
Next or Back Button:
Press these buttons to go to the previous / next track.
Repeat
The repeat functions that you can enjoy are dependent on the disc types played.
CD: All tracks repeat, single track repeat and given.
1. Press "MODE" key once.
2. LCD will display "REP" = repeat of 1 track.
3. Press "MODE" key again to repeat all.
4. Press "MODE" key again to repeat album.
5. Press "MODE" key again to random mode. 5
6. Press "MODE" key again to normal playback.
USB Memory
Up to 20 tracks can be programmed for disc play in any order.
Before use, be sure to press "STOP" button.
1. Set "USB" mode.
2. Press the "PROGRAM" button, the display will show "P01", moreover, it will indicate program no. and digits for track no.
3. Select a desired track by using the skip buttons.
4. Press the "PROGRAM" button again to confirm desire track into program.
5. Repeat step 2 and 3 to enter additional memories into the program.
6. When ALL the desired tracks have programmed. Press "PLAY/PAUSE" button to play the disc in the order you have
programmed.
7. Press "STOP" button twice to terminal program play.
014.
Page 014