Berger & Schroter PRO X7 Notice D'utilisation page 26

All manuals and user guides at all-guides.com
5-7 Vertical height measure mode
Principle:
Measuring distance between two points (Bottom and
Top) in the vertical direction, and the angle (a) bet-
ween the two points, to calculate the vertical height
between the two VH.
The aiming point is aligned at the bottom of the measured object, hold
down the key.
Aim the bottom of the target, press
and hold power key
"Bottom" & "Scan" will show up in the
screen, the rangefinder will start to
measure to the bottom. When the dis-
tance to the bottom is measured, the
screen will show "Up"& "Scan", then
start to look for the top.Then distance
to top position will be continuously
displayed in the screen.
Bottom side
26
Top distance
Vertical Height