Kyocera KR1 Mode D'emploi page 14

All manuals and user guides at all-guides.com
2. Hold the RESET button for 10 seconds, and then release it.
The
Note: POWER LED
indicating proper connections.
3. Connect the LAN cable to one of the four LAN ports. The LED of the LAN port
you select will illuminate green.
Launch your web browser. An error message may appear. Disregard this
4.
message, and continue with the steps below.
Enter
5. 192.168.0.1
6. Select Browse . A dialogue box will appear prompting you to select the latest
firmware version. Select your desired firmware version, and click
Click , to send the latest firmware to your Kyocera KR1 Mobile Router.
7. Send
Please do not click any buttons once the firmware download process has
Caution:
started. Doing so could disrupt the firmware download process, and cause your
Kyocera KR1 Mobile Router to malfunction.
Your Kyocera KR1 Mobile Router and computer may not provide an accurate
Note:
indication of activity. An error screen may appear. This is normal. Please be patient.
The firmware recovery process will take five to ten minutes. The firmware recovery is
complete when the WLAN LED blinks green.
Reset the Dynamic IP–MAC
Open
1. System Properties
Select .
2. Network
Show
3. Built-In Ethernet
4. Select TCP/IP .
will illuminate green, and the
in the address line of your web browser, and press
.
.
11
will blink green,
STATUS LED
GO
Open.
.