Uline H-10316 Instructions De Montage page 3

3. Using two people, place large laminate panels
within frame and slide vertical bar over large
laminate panels. Tighten bottom lock using Allen
wrench. (See Figure 3)
NOTE: Ensure bolt heads are facing the same
direction when inserting the horizontal and
vertical bars through remainder of assembly.
Figure 3
Vertical Bar
4. Starting from the top of posts, insert horizontal bar
between posts and slide it onto bottom row of
panels. Tighten locks using Allen wrench.
(See Figure 4)
Figure 4
PAGE 3 OF 15
STARTER DIVIDER ASSEMBLY CONTINUED
Large
Laminate
Panel
Horizontal
Lock Bar
5. Using two people, place small laminate panels
within frame and slide vertical bars over small
laminate panels. Tighten bottom locks using Allen
wrench. (See Figure 5)
Figure 5
Vertical Bar
6. Insert horizontal bar between posts and slide onto
top row of panels. Tighten locks using Allen wrench.
(See Figure 6)
Figure 6
Small
Laminate
Panel
1122 IH-10316