Gioteck EX-06 Mode D'emploi page 8

PS3 SET UP :
1] Connect the HDMI lead between the PS3 console and your TV/Monitor.
2] Connect the AV RCA cable into the back of your PS3.
3] Connect the RED/WHITE connectors from the AV RCA Cable into the
4] Connect the the wireless transmitter into an available
5] Connect the audio cable into the wireless transmitter.
6] Turn on your PS3 console.
7] Turn your Headset ON by pressing the Power Button. Pairing with the
8] Make sure that microphone mute is OFF.
9] Go to Settings > Accessory Settings > Audio Device Settings
10] Go to Settings > Sound Settings > Audio Output Settings,
EX6UNI-wireless-manual-book.indb 6
All manuals and user guides at all-guides.com
WITH HDMI (OPTION A)
corresponding RED/WHITE sockets on the RCA to Audio cable.
USB port on the front of your PS3 console.
wireless transmitter should happen automatically. However, if pairing is
unsuccessful, please refer to the Pairing section in 'Getting Started'.
and select EX-06 Headset for both the Input and Output. You
will be able to hear yourself talking into the microphone through
the headset earcups. Set the desired volume level.
choose Audio Input Connector/ Scart / AV Multi.
HDMI OUTPUT
HDMI CABLE
(NOT SUPPLIED)
TV/MONITOR
HDMI INPUT
AV MULTI OUT
CONNECT INTO
THE FRONT
OF PS3
AV RCA CABLE
(SUPPLIED WITH
PS3 CONSOLE)
01 02
03
04
05
11/09/2013 10:24
6