Publicité
1
AMD mounting hole
Depending on your Intel CPU, place the 4 corner screws (10) in
the corresponding hole of the CPU adapter (3), Be careful of
the direction!
2
4
Depending on your Intel processor, please use the correspond-
ing corner brackets (5). Then fix the corner brackets on the
pump using the screws (13)
3
Install Liquid Force step by step
All manuals and user guides at all-guides.com
INTEL
1 2 3
AMD1 2 3
10
Intel mounting hole
3
13
Then remove the
protective film
Attention do not
forget this step as
this may damage
your installation!
AM4 1 2 3
UNIVERSEL 4
Then install the adapter on the back of your motherboard.
8
Apply the thermal paste (8) evenly to the CPU.
9
A
B
Position the pump on your CPU previously coated with
thermal paste. Then fix the spring / pressure screws (9). Start
by adjusting the screws then tighten the screw A, the screw
C, then B and finally D.
Apply the thermal paste (8) evenly to the CPU.
D
A
D
B
C
C
03
Publicité
