equil SMARTMARKER Mode D'emploi page 13

All manuals and user guides at all-guides.com
Troubleshooting
My marker notes appear on
the whiteboard but not on
my device running Equil
Note.
The sensor is beeping
when I draw, and the red
LED lights are glowing.
The sensor or eraser is
sliding on the board surface.
The Smartmarker sleeve
keeps buzzing even when
I've stopped drawing.
Compatible markers
Bullet Point only
Expo
bold color dry marker
low odor
Sharpie
Sharpie
Whiteboard Marker
Make sure your sensor
and Smartmarker are
fully charged.
Confirm that
Smartmarker is paired
with your device.
Make sure you are
pressing firmly enough
while drawing.
You may be drawing
beyond the capture
area of your board
space. Draw closer to
the sensor.
Your magnetic whiteboard
may not be thick enough
for the sensor magnets.
Please use the included
mounting plates with
Command Adhesive tape.
The neck of the dry erase
marker is most likely
bent. Replace the bent
marker with another dry
erase marker inside the
sleeve.
e-boardmarker
Legamaster
e-boardmarker
12