Rosewill RMS-SDM01 Guide D'installation page 5

All manuals and user guides at all-guides.com
RMS-SDM01 Desk Mount Installation Guide
Installation
Step 1 :
Carefully place the computer faced down on a flat surface to ensure not to scratch the display
with the stand hanging over the edge. Lift the stand up to its highest point. Insert A-G card at
slight upward angle until you feel the latch.
Original iMac stand
A-G
Step 2 :
With the card in the slot, lower the stand until it is as far down as it can be (you will see screws).
Separate the stand from iMac monitor by using A-E tool, and set the original M3 screw 8 pcs
aside carefully.
A-E
3