Publicité
Using
1. Make sure the same transmission channel has been
setup on the transmitter and receiver.
2. Set the ON/OFF switch (9) to the position ON to switch
on the transmitter respectively the motion detector.
3. The receiver does not come with a separate ON/OFF
switch. It is always activated when the batteries are in-
serted.
4. If the motion detector detects motion within its field of
view, it transmits a signal to the receiver. The LED indi-
cator (2) lights up and the receiver plays back the se-
lected signal respectively the melody.
5. Set the ON/OFF switch (9) to the position OFF to switch
off the motion detector. A signal transmission does not
take place any longer.
Cleaning and Storing
Clean the motion controlled wireless gong only with a
dry or lightly moistened cloth. Do not use aggressive
chemicals or abrasives for cleaning.
Do not immerse any parts of the product in liquids of
any kind.
Store the product indoors in a dry place that is protect-
ed from dust, dirt and extreme temperatures.
Store the product out of reach of children.
Before cleaning, storing or when not in use remove the
batteries from the transmitter and from the receiver.
All manuals and user guides at all-guides.com
Using
15
Publicité
