Oregon Scientific WRB308 Manuel D'utilisation page 16

CHANGE SETTINGS
To change, clock, alarm, channel and location settings:
1. Press and hold MENU for 2 seconds to enter setting
mode.
2. Press or
options (Set Alarm / Set Clock / Set Channel / Set
Location) and press MENU to select the desired
one.
3. Use or
press MENU to confirm and move onto the next
one.
4. Press EXIT to leave the setting mode at any time.
NOTE To reach a number quickly, press and hold
or .
RECEPTION SIGNAL STATUS
To check the status of the reception signal, look at the
reception icon on the display.
ICON DESCRIPTION
Current selected channel signal is strong
Current selected channel signal is weak
No NOAA alert message has been received for
10 days. Current selected channel signal is weak
No NOAA alert message has been received for
10 days. Current selected channel signal is strong
WRB308 M_EN_V6.P65
All manuals and user guides at all-guides.com
to scroll through the setting
to change a setting, then
16
NOTE When the radio is set to NOAA ON, Standby or
Mute, it will continually search for a NOAA signal.
NOAA ALERT MESSAGES
MESSAGE CODES USED BY THE NWR
When the NWR airs urgent warnings, a digital code
known as Specific Area Message Encoding (SAME) is
included as part of the message. This coding system
contains specific information including the localized
geographical area affected and the expiration time of
the message. The WR108 retrieves and interprets SAME
code messages and alerts the user. When SAME codes
for a specific region have been entered into the unit, the
unit alerts the user to relevant warning information for
the specified region. Once alerted, a voice broadcast
can be heard.
SET UP RADIO TO RECEIVE NOAA ALERT MESSAGES
To receive a NOAA alert message, press
radio to one of the following options:
• Radio ON [
messages can be heard continuously.
• Radio Standby [
will switch to ON when a NOAA alert message is
received.
16
2005.5.30, 9:49
to set the
]: The radio is ON and voice
]: The radio is in Standby and