Télécharger Imprimer la page

Yakima HullyRollers Mode D'emploi page 3

Masquer les pouces Voir aussi pour HullyRollers:

Publicité

Les langues disponibles

Les langues disponibles

Release brakes on rollers by
pulling and turning to the left.
Install a second pair of Hully
Rollers, Mako or LandShark
Saddles on FRONT crossbar.
seT The
roller
brakes:
Pull tab out and
to the right while
rocking boat
gently until the
brake tabs nest.
TighTen sTraps
Insert end of plain
strap into buckle
as shown.
1033424C-3/15
All manuals and user guides at all-guides.com
Position boat hull on rear
rollers, and slide boat
onto vehicle.
insTall sTraps
Holding the buckle end, pass a strap over the
boat, and under each crossbar.
You may need to loosen the attachments
and slide rollers inboard or outboard so
that rollers rest against the hull.
PULL STRAP
ENDS TO
TIGHTEN.
Always pass the strap
inboard to the tower.

Publicité

loading