Télécharger Imprimer la page

Publicité

Liens rapides

48.18 · Technische Änderungen vorbehalten · Technical amendments reserved · Modifications techniques réservées
!
Scheinwerfer RGB W
Floodlight RGB W
Projecteur RGB W
25
25
unten
bottom
dessous
67
67
Ø 100
Ø 100
Gebrauchsanweisung
Anwendung
Flächenscheinwerfer mit breitstreuender
Lichtstärkeverteilung für additive Farbmischung
RGB W.
Die Leuchte kann über eine DALI-
Farblichtsteuerung (DT 8, RGBWAF, xy)
gesteuert werden. Dazu empfehlen wir den
Einsatz von BEGA DALI-Systemkomponenten.
Scheinwerfer mit Montagedose für die ortsfeste
Montage, auf eine Wand, unter eine Decke
oder auf einen Sockel.
Produktbeschreibung
Leuchte besteht aus Aluminiumguss,
Aluminium und Edelstahl
Beschichtungstechnologie BEGA Unidure
Sicherheitsglas mit optischer Struktur
Reflektor aus eloxiertem Reinstaluminium
Drehbereich des Scheinwerfers 350°
Schwenkbereich -35°/+70°
Montagedose mit 2 Befestigungsbohrungen
ø 4,5 mm · Abstand 67 mm
2 Leitungseinführungen zur Durchverdrahtung
der Anschlussleitung ø 7-10,5 mm,
max. 5 G 1,5@
Anschlussklemme 2,5@
mit Steckvorrichtung
Schutzleiteranschluss
LED-Netzteil
DALI steuerbar
220-240 V x 0/50-60 Hz
BEGA Thermal Switch
®
Temporäre thermische Abschaltung zum
Schutz temperaturempfindlicher Bauteile
Schutzklasse I
Schutzart IP 65
Staubdicht und Schutz gegen Strahlwasser
Schlagfestigkeit IK07
Schutz gegen mechanische
Schläge < 2 Joule
c  – Konformitätszeichen
Windangriffsfläche: 0,04 m²
Gewicht: 4,1 kg
Ø 4,5
Instructions for use
Application
Floodlight with wide beam light distribution for
additive colour mixing RGB W.
The luminaire can be controlled by DALI colour
light control (DT 8, RGBWAF, xy).
We recommend the use of BEGA DALI system
components.
Floodlight with mounting box for permanent
installation on a wall, under a ceiling or on a
pillar.
Product description
Luminaire made of aluminium alloy,
aluminium and stainless steel
BEGA Unidure
coating technology
®
®
Safety glass with optical structure
Reflector made of pure anodised aluminium
Rotation range of floodlight 350°
Swivel range -35°/+70°
Mounting box with 2 fixing holes
ø 4.5 mm · 67 mm spacing
2 cable entries for through-wiring of mains
supply cable ø 7-10.5 mm, max. 5 G 1.5@
Connecting terminal 2.5@
with plug connection
Earth conductor connection
LED power supply unit
DALI controllable
220-240 V x 0/50-60 Hz
BEGA Thermal Switch
Temporary thermal shutdown to protect
temperature-sensitive components
Safety class I
Protection class IP 65
Dust-tight and protection against water jets
Impact strength IK07
Protection against mechanical
impacts < 2 joule
c  – Conformity mark
Wind catching area: 0.04 m²
Weight: 4.1 kg
BEGA Gantenbrink-Leuchten KG · Postfach 31 60 · 58689 Menden · info @ bega.com · www.bega.com
290
290
100
100
Fiche d'utilisation
Utilisation
Projecteur extensif à répartition lumineuse
extensive pour mixage de couleurs RGB W.
Le luminaire peut être commandé via une
gestion de contrôle de couleurs DALI
(DT 8, RGBWAF). A cette fin nous
recommandons d'utiliser le système
composants BEGA DALI.
Projecteur avec boîte de montage pour
installation fixe à un mur, sous un plafond ou
sur un socle.
Description du produit
Luminaire fabriqué en fonderie d'aluminium,
aluminium et acier inoxydable
Technologie de revêtement BEGA Unidure
Verre de sécurité à structure optique
Réflecteur en aluminium pur anodisé
Projecteur orientable sur 350°
Inclinaison -35°/+70°
Boîte de montage avec 2 trous de fixation
ø 4,5 mm · Entraxe 67 mm
2 entrées de câble pour branchement en
dérivation d'un câble de raccordement
ø 7-10,5 mm, max. 5 G 1,5@
Bornier 2,5@ avec connecteur embrochable
Raccordement de mise à la terre
Bloc d'alimentation LED
Pilotage DALI
220-240 V x 0/50-60 Hz
BEGA Thermal Switch
®
Interruption thermique temporaire pour
protéger les composants sensibles à la
température
Classe de protection I
Degré de protection IP 65
Etanche à la poussière et protégé contre les
jets d'eau
Résistance aux chocs mécaniques IK07
Protection contre les chocs
mécaniques < 2 joules
c  – Sigle de conformité
Prise au vent : 0,04 m²
Poids: 4,1 kg
84 392
IP 65
125
125
165
165
®
®
1 / 3

Publicité

loading

Sommaire des Matières pour BEGA 84 392

  • Page 1 < 2 joules Windangriffsfläche: 0,04 m² Weight: 4.1 kg c  – Sigle de conformité Gewicht: 4,1 kg Prise au vent : 0,04 m² Poids: 4,1 kg BEGA Gantenbrink-Leuchten KG · Postfach 31 60 · 58689 Menden · info @ bega.com · www.bega.com 1 / 3...
  • Page 2 Make sure that gasket is positioned correctly. embrochable jusqu’à la butée. Anschlag eindrücken. Veiller au bon emplacement du joint. Auf richtigen Sitz der Dichtung achten. 2 / 3 BEGA Gantenbrink-Leuchten KG · Postfach 31 60 · 58689 Menden · info @ bega.com · www.bega.com...
  • Page 3 83 001 508 Joint du boîtier 83 001 508 Dichtung Montagedose 83 001 839 Gasket mounting box 83 001 839 Joint boîte de montage 83 001 839 BEGA Gantenbrink-Leuchten KG · Postfach 31 60 · 58689 Menden · info @ bega.com · www.bega.com 3 / 3...