Télécharger Imprimer la page

cecotec STEEL&TOAST 1L Manuel D'instructions page 52

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 13
ENGLISH
Note
You may notice a slight burning smell or smoke when using the sandwich maker for the
first time, caused by the excess of lubricants from the manufacturing process. Ensure good
ventilation and let the toaster complete a few cycles until no odour or smoke can be noticed.
After a short cooling down period, your toaster will be ready for use. The operation instructions
are detailed below.
3. OPERATION
-
Plug the toaster to the power supply and place slices of bread into the bread slots of the
appliance.
-
Turn the dial to the desired level.
-
Lower the lever; the toaster will start working and the Cancel button light indicator will
turn on.
-
The bread slices will be ejected and the appliance will shut down automatically when the
process is finished.
-
Use the extra-lifting system to easily extract small bread slices.
Reheat function
-
You can use this function to warm up cold toasts.
-
Insert the toast into the toaster and lower the lever. Then, press the reheat button to select
this function.
Defrost function
Insert the toast into the toaster and lower the lever. Then, press the defrost button to select
this function.
Cancel function
The toasting process can be stopped anytime by pressing "CANCEL".
Crumb tray
-
The crumb tray is intended for collecting the crumbs that fall on the base of the toaster
while toasting.
-
Pull from the crumb tray to take it out. Empty its contents and put it back in place.
Bun holder
If required, put the bun warmer over the bread slots. Select an intensity level and start the
toasting or warm-up process by lowering the lever.
52
STEEL&TOAST 1L

Publicité

loading