Work Smart ECH8967R5 Instructions De Montage

FAUTEUIL DE DIRECTION EN CUIR RECONSTITUÉ
ÉTAPE 1 ÉTAPE 2
ÉTAPE 4 ÉTAPE 5
Enlever toutes les pièces du carton, les organiser selon les numéros de pièce indiqués sur la liste et vérifier que les quantités des pièces reçues
sont correctes.
ETAPE 1 lnserer cinq roulettes (2) dans la Base (1 ), les pousser tres fort jusqu'a ce que vous entendiez ou sentiez la roulette (2) s'enclencher.
Insérer le cylindre pneumatique (3) dans la Base (1) et glisser les soufflets (4) sur le cylindre pneumatique (3).
ETAPE 2 Fixer les bras (BL et BR) au coussin du siege (6) avec une vis moyen (10) pour trou interieur et deux vis longues (11) pour trous exterieurs pour les
bras (8L et 8R). RESSERRER COMPLETEMENT TOUTES LES VIS AVEC LA CLE ALLEN (13).
ETAPE 3 Fixer la Plaque du siege (5) au coussin du siege (6) avec la fleche vers l'avant du siege avec deux vis moyennes (10) a l'avant du fauteuil et deux vis
courtes (9) pour l'arriere de la chaise. RESSERRER COMPLETEMENT TOUTES LES VIS AVEC LA CLE ALLEN (13).
ETAPE 4 Fixer le support du dossier (12) au coussin du siege (6) avec quatre vis moyennes (10). RESSERRER COMPLETEMENT TOUTES LES VIS AVEC LA
CLE ALLEN (13).
ETAPE 5 Placer le siege assemble sur le dessus du verin pneumatique (3) et pousser vers le bas.
ATTENTION: AVANT D'UTILISER LE FAUTEU IL, S'ASSU RER D'AVOIR SERRE COMPLETEMENTTOUTES LES VIS.
ECH8967R5 / ECH8967K5
INSTRUCTIONS DE MONTAGE
ÉTAPE 3
PIÈCE
1. Base . . . . . . . . . . . . . . . . . . . . . . . . . . .1
2. Roulettes . . . . . . . . . . . . . . . . . . . . . . . .5
3. Vérin pneumatique . . . . . . . . . . . . . . . . .1
4. Souflett . . . . . . . . . . . . . . . . . . . . . . . . .1
5. Plaque du siège . . . . . . . . . . . . . . . . . . .1
6. Coussin du siège . . . . . . . . . . . . . . . . . .1
7. Dossier. . . . . . . . . . . . . . . . . . . . . . . . . .1
8. Bras (8L et 8R) . . . . . . . . . . . . . . . . . . . .2
9. Vis courtes . . . . . . . . . . . . . . . . . . . . . . .2
10. Vis moyennes . . . . . . . . . . . . . . . . . . . .8
11. Vis longues. . . . . . . . . . . . . . . . . . . . . .4
12. Support du dossier (préinstalle) . . . . . . .1
13. Clé Allen (non montré). . . . . . . . . . . . . .1
© Office Star Products février, 2023
QTÉ
WORK SMART LIMITED WARRANTY
Work Smart chairs are warranted from the date of purchase against failure due to material and workmanship as follows:
• 15 Years on all non-moving metal parts.
• 5 Years on component parts including Control mechanisms, pneumatic cylinders, wood, plastic parts, base and casters.
• 3 Years on upholstery fabric and foam against wear and deterioration.
• Leather is not warranted against routine scratching and scuffing, as leather is subject to minor blemishes in use.
To make a warranty claim, contact Parts Department. Provide model number, proof of purchase, description of the problem and obtain return authorization. At it's
option Office Star Products will:
(a) Supply compatible components of current manufacture.
(b) Repair the customer's component. The customer must prepay freight on any components returned to the factory. Return freight on
components still in warranty will be paid by Office Star Products.
*All warranties are limited to the original purchaser for normal commercial usage defined as a standard forty hour work week by persons weighing 275 lbs. or less.
The BC9601 is for persons weighing 300 lbs. or less. The BC9602 is for persons weighing 400 lbs. or less. The BC9603 is for persons weighing 500 lbs. or less.
EX1098, EC1283C & ECH12801 are for persons weighing 350 lbs. or less. This warranty will not cover labor, freight or damage from misuse, abuse, negligence,
alteration, accident, vandalism, rusting, acts of nature or any other event beyond the control of Office Star Products. The warranty does not cover cosmetic dam-
age that may result from normal use. Liability for incidental or consequential damages is excluded. The user assumes all risk of injury resulting from use of this
product. When usage is more than 40 hours per week, a two year warranty on all parts applies. Fabric is warranted for one year. This warranty gives you specific
legal rights, and you may also have other rights which vary from state to state. All Work Smart chairs are built to meet or exceed ANSI BIFMA standards.
Our quality standards are among the highest in the industry. Sometimes, no matter how hard we try, there are times when parts are damaged or missing. Our
Parts Department will do everything possible to promptly remedy the problem. Contact us via e-mail parts.department@officestar.net, by Fax 1-909-930-5629, or
toll free parts number 1-800-950-7262, Monday through Friday 8:00 a.m. - 3:30 p.m. Pacific Time.
ECH8967R5 / ECH8967K5
BONDED LEATHER MANAGER'S CHAIR
OPERATING INSTRUCTIONS
FEATURES
• PNEUMATIC SEAT HEIGHT ADJUSTMENT
To raise seat remove pressure from seat and pull lever (1) up.To
lower seat height sit on chair and pull lever (1) up.
NOTE: It is normal for chair to slightly lower under body weight.
• LOCKING TILT ADJUSTMENT
For individual comfort, this chair has been equipped with an
adjustment that will allow the user to change the tension of the
tilting feature. Turn knob (2) clockwise to increase tension and
counter-clockwise to decrease or ease the tension. To lock
return chair to the upright position and push lever (1) in. To
unlock pull lever (1) out.
NOTE: Be careful not to loosen back tilt adjustment knob completely.
• FLIP ARM
To flip arms up, simply pull up on arm. To lower arm, simply pull
down on arm.
WARNING
1. Use this product only one person at a time.
2. Do not use this chair unless all bolts screws and knobs are
securely tightened.
3. Check that all bolts screws and knobs are tight every three months or
as needed.
4. Do not overturn back tilt knob when decreasing tension.
5. Dispose of packing material properly. Do not use plastic cover as head
covering. It may cause suffocation.
6. Do not use chair as a stepladder.
7. Use this chair for its intended purpose only.
8. Use mild detergent only for cleaning.