Work Smart EC4350 Instructions De Montage

CHAISE ERGONOMIQUE MULTI-FONCTION
7
13
15
14
6
16
9
10
8L
11
4
3
1
2
Enlever toutes les pièces du carton, les organiser selon les numéros de pièce indiqués sur la liste et vous assurer que les
quantités des pièces sont correctes.
ÉTAPE 1 Insérer cinq Roulettes (2) dans la Base (1), les pousser très fort jusqu'à ce que vous entendiez ou sentiez la Roulette (2) s'enclencher.
Insérer le Vérin pneumatique (3) dans la Base (1).
ÉTAPE 2 Fixer le Mécanisme (5) au Coussin du siège (6) avec six Vis du mécanisme (12). RESSERRER COMPLèTEMENT TOUS LES VIS AVEC
CLÉ ALLEN (17).
ÉTAPE 3 Fixer les Appui-bras (9) au Bras (8L et 8R) avec deux Vis pour les bras (10) for chaque Bras (8). RESSERRER COMPLèTEMENT TOUS
LES VIS AVEC CLÉ ALLEN (17). Fixer les Bras (8L et 8R) au Coussin du siège (6) en utilisant une Boulon avec des rondelles (11) pour chaque Bras (8).
RESSERRER COMPLèTEMENT LES BOULONS AVEC DES RONDELLES (11).
ÉTAPE 4 Placer le siège assemblé sur le vérin pneumatique (3) et mettre de la pression.
ÉTAPE 5 Fixer le Support du dossier (15) au Coussin du dossier (7) avec Boulon (13). RESSERRER COMPLèTEMENT LE BOULON (13) AVEC
CLÉ ALLEN (17). Couvrir le Support du dossier (15) en utilisant le Couvercle en plastique (16). Insérer le Support du dossier (15) dans la partie arrière du
Mécanisme (5) et le fixer avec le Boulon du dossier avec rondelles (14). RESSERRER COMPLèTEMENT TOUS LE BOULON DU DOSSIER AVEC
RONDELLES (14) AVEC CLÉ ALLEN (17).
ATTENTION : AVANT D'UTILISER LE FAUTEUIL, VOUS ASSURER D'AVOIR RESSERRÉ COMPLèTEMENT TOUTES
LES VIS ET BOUTONS.
EC4350
INSTRUCTIONS DE MONTAGE
9
10
8R
11
5
12
PIèCE
1. Base . . . . . . . . . . . . . . . . . . . . . . . 1
2. Roulettes . . . . . . . . . . . . . . . . . . . . 5
3. Vérin pneumatique . . . . . . . . . . . . 1
4. Soufflet . . . . . . . . . . . . . . . . . . . . . 1
5. Mécanisme . . . . . . . . . . . . . . . . . . 1
6. Coussin du siège . . . . . . . . . . . . . . 1
7. Coussin du dossier . . . . . . . . . . . . 1
8. Bras (7L et 7R) . . . . . . . . . . . . . . . 2
9. Appui-bras . . . . . . . . . . . . . . . . . . . 2
10. Vis pour les bras . . . . . . . . . . . . . 4
11. Boulon avec des rondelles . . . . . 2
12. Vis du mécanisme . . . . . . . . . . . . 6
13. Boulon . . . . . . . . . . . . . . . . . . . . . 1
14. Boulon du dossier avec rondelles 1
15. Support du dossier . . . . . . . . . . . 1
16. couvercle en plastique . . . . . . . . . 1
17. Clé Allen (non montré) . . . . . . . . . 1
6
2
3
1
4
QTÉ
LIMITED WarranTy
Work Smart chairs are warranted from the date of purchase against failure due to material and workmanship as follows:
• 15 Years on all non-moving metal parts .
• 5 Years on component parts including Control mechanisms, pneumatic cylinders, wood, plastic parts, base and casters .
• 3 Years on upholstery fabric and foam against wear and deterioration .
To make a warranty claim, contact Parts Department . Provide model number, proof of purchase, description of the problem and
obtain return authorization . At it's option Office Star Products will:
(a) Supply compatible components of current manufacture .
(b) Repair the customer's component . The customer must prepay freight on any components returned to the factory . Return
freight on components still in warranty will be paid by Office Star Products .
*All warranties are limited to the original purchaser for normal commercial usage defined as a standard forty hour work week by persons weighing 250 lbs. or
less. This warranty will not cover labor, freight or damage from misuse, abuse, negligence, alteration, accident, vandalism, rusting, acts of nature or any other
event beyond the control of Office Star Products. The warranty does not cover cosmetic damage that may result from normal use. Liability for incidental or
consequential damages is excluded. The user assumes all risk of injury resulting from use of this product. When usage is more than 40 hours per week, a two
year warranty on all parts applies. Fabric and foam is warranted for one year. This warranty gives you specific legal rights, and you may also have other rights
which vary from state to state.
Our quality standards are among the highest in the industry . Sometimes, no matter how hard we try, there are times when parts
are damaged or missing . Our Parts Department will do everything possible to promptly remedy the problem . Contact us via e-mail
parts@officestar.net, by Fax 1-909-930-5629, or toll free parts number 1-800-950-7262, Monday through Friday 8:00 a .m . - 5:00
p .m . Pacific Time .
© Office Star Products Août 2013
EC4350
MULTI-FUNCTION ERGONOMIC CHAIR
OPERATING INSTRUCTIONS
FEaTUrES
• PNEUMATIC SEAT HEIGHT ADJUSTMENT
To raise seat remove pressure from seat and lift lever (1) .
To lower seat height sit on chair and lift lever(1) .
NOTE: It is normal for chair to slightly lower under body weight .
• BACKREST ANGLE ADJUSTMENT
To adjust back angle lift lever (2) . Leave lever up for free
float or push lever down to lock at any angle .
• SEAT/BACK ANGLE ADJUSTMENT AND FORWARD TILT
To adjust Seat/Back angle lift lever (3) . Leave lever up for
free float or push lever down to lock . For forward tilt lean
back with lever (3) in the down position and push lever (4)
forward . Lift lever (3) and the seat will tilt forward for key-
board intensive activities .
• TILT TENSION ADJUSTMENT
For individual comfort, this chair has been equipped with
an adjustment that will allow the user to change the tension
of the tilting feature . Turn knob (5) clockwise to increase
tension and counter-clockwise to decrease or ease the
tension .
NOTE: Be careful not to loosen back tilt adjustment knob
completely .
5
• ARM HEIGHT ADJUSTMENT
Push button (6) in to allow the arms to move up and down
freely, release button (6) when desired height is reached .
WarnInG
1 . Use this product only one person at a time .
2 . Do not use this chair unless all bolts screws and knobs are
securely tightened .
3 . Check that all bolts screws and knobs are tight every three
months or as needed .
4 . Do not overturn back tilt knob when decreasing tension .
5 . Dispose of packing material properly . Do not use plastic
cover as head covering . It may cause suffocation .
6 . Do not use chair as a stepladder .
7 . Use this chair for its intended purpose only .
8 . Use mild detergent only for cleaning .