Sony AIBO ERA-301P2 Mode D'emploi page 14

1 Charging terminals
Charge AIBO's internal battery pack
whenever AIBO is placed on the
station. Makes contact with terminals
on AIBO's stomach.
2 SET/CANCEL button
Press to put the station core into
setting mode to make or cancel a
setting. Press again to return to
normal mode.
3 MODE/NEXT button
Press to change the indication in the
display panel. In setting mode,
pressing this button changes the
setting item.
4 DISPLAY/– (minus) button
When the date or time indication is
displayed, pressing this button
changes the display format.
In setting mode, each press of the
button decreases the value to a next
smaller one. Holding down the
button decreases the value
continuously.
14
Downloaded from: https://www.usersmanualguide.com/
5 LIGHT/+ (plus) button
In normal mode, press to turn on the
backlight.
In setting mode, each press of the
button increases the value to a next
greater one. Holding down the button
increases the value continuously.
6 AC Adapter terminal (on the
rear of the station core)
Connect the AC adapter supplied
with the AIBO or an optional AC
adapter to this terminal.
7 Placement detection switch
Detects when AIBO is placed on the
station.
8 Fixing screw (supplied)
Used to fix the station core to the
stand (supplied with the AIBO).
9 Date / time / time zone / volume
level indication
q; Battery indicator
Indicates the charging level of
AIBO's internal battery pack.