Installing And Connecting The Refrigerator; Instructions For Installing The Refrigerator; Installation Of The Water Drain (Optional); Installing The Refrigerator - Carbest CV50L Manuel De L'utilisateur

UK|Carbest Compressor Refrigerator CV50L|713572

INSTALLING AND CONNECTING THE REFRIGERATOR

Instructions for installing the refrigerator

Please note the following when installing the refrigerator:
Install the refrigerator in such a way that the warm air generated can easily flow away
(either upwards or to the sides, Figure 3 to Figure 4, page 2).
Explanation
1 Cold intake air
2 Hot exhaust air
3 Fan
4 Distance above the refrigerator if there is not enough air to circulate over or on the
side.
Product size: W380 x H530 x D490 mm
Please note the following installation dimensions: W390 x H540 x D540 mm
Keep objects away from openings in the cabinet or installation structure (such as ventilation
slots, etc.).
Condensation is produced during normal operation of the refrigerator. You can either wipe
up the condensation on the bottom of the refrigerator at regular intervals or drain it through
a water drain in the bottom of the refrigerator

Installation of the water drain (optional)

Connect a hose with an inner diameter of 10 mm (not included in the scope of delivery) to
the water drain.
Place the refrigerator on its side to reach the bottom.
Mount the water drain (Figure 5, page 2) facing forward or backward, depending on the
desired direction.
Remove the water drain plug (Figure 5, page 2) inside the refrigerator.

Installing the refrigerator

Proceed as follows to install the refrigerator:
If you want to drain the condensate through a hose, proceed as follows Install the water
drain connection
Open the refrigerator door.
Remove the dummy plugs (Figure 6, page 2).
Slide the refrigerator into the recess.
Fasten the refrigerator with suitable screws (Figure 6, page 2).
Press the dummy plugs (Figure 6, page 2) into the openings.
29