Cleaning Instructions - Nesco FS-250 Manuel D'utilisation

CLEANING INSTRUCTIONS

• Before cleaning turn off any switches and ensure the power cord is removed from
the electrical outlet and allow appliance to cool.
• Wipe the outside area of appliance with a damp cloth and dry with a lint free
cloth.
• Never place appliance in water or other liquids.
• Never use abrasive cleaners or scouring pads to clean any parts of this appliance.
• Never immerse the base of this appliance in water or other liquid.
• The blade, slicing guard and food carriage can be removed and hand washed in
warm soapy water. Be careful when cleaning the blade, as it is extremely sharp.
Do not leave blade under water; trying to handle sharp objects in water can be
hazardous. See Fig. 1-3.
• Set thickness control to "0". This will keep the blade edge covered by support
plate.
• For ease of cleaning, the food carriage can be tilted up or removed. Refer to Fig
1-2.
• Remove blade by holding the blade with one hand and using two fingers to pinch
and turn blade locking screw. Unlock blade by turning screw clockwise. Carefully
remove blade and hold by using the blade locking screw. Refer to Fig. 3.
• After cleaning and drying, install blade to base in reverse order of removal.
FIG. 1
CARRIAGE REMOVAL
FIG. 2
CARRIAGE TILT
4
FIG. 3
BLADE REMOVAL