Publicité
Les langues disponibles
Les langues disponibles
Installation
B
C
D
D
E
34
English
DV6900B_SimpleUX_WEB_Vent_EN.indd 34
4. Reconnect the cut portion of the duct (C), and then
fasten it to the ramp on the appliance base with the
screw (B) which you set aside in Step 2.
5. Insert the elbow (D) through the rear hole and
connect it to the duct (C).
6. Rotate the elbow (D) through the bottom opening.
CAUTION
C
Do not to pull or damage the electrical wires inside the
dryer when inserting the duct.
7. Apply duct tape (E) on the joint as shown.
CAUTION
All joints must be secured with duct tape, otherwise,
they may separate and cause a safety hazard.
2023/6/29 11:27:11
Publicité
