Barrette Y-Latch Instructions D'installation page 3

DOUBLE DRIVE GATE INSTALLATION
1.
Determine Gate Opening:
Determine the gate opening by adding the width
of the gates plus clearance of hinges plus a
clearance distance of 1-3/4" to 3" for the Y-latch
(Fig. 1). (See hinge instructions for clearance
details.)
NOTE:
Mount gate on hinges prior to installing the
Y-latch.
2.
Attach Y-Latch to Fence Gate:
Place and hold Y-latch on gate upright. Attach
Y-latch to gate upright with three self-tapping pan
head screws (Fig. 2).
3.
Determine Location of Stop Bracket:
While the swing arms are lowered and leveled,
place stop bracket flat on the gate while moving
the bracket up or down until the swing arm is
level. Once the swing arm is level, mark with a
pencil the stop bracket location on the side of the
gate (Fig. 3).
4.
Attach Stop Bracket to Gate:
With the gate opened, place stop bracket on the
gate and align with the pencil mark. Attach stop
bracket to gate with the remaining three self-
tapping pan head screws (Fig. 4).
Gate Gate
Min. Spacing 1¾"
Max. Spacing 3"
Gate
Upright
Gate
Upright
Gate
Upright
Pencil
Line
Fig. 1
Fig. 2
Fig. 3
Fig. 4
3