Manuels Connexes pour Kalon Echo Crib 021
Sommaire des Matières pour Kalon Echo Crib 021
- Page 1 ASSEMBLY INSTRUCTIONS ECHO CRIB INSTRUCTIONS POUR LE MONTAGE DU LIT BÉBÉ ECHO Model N : Echo Crib 021 | KALON STUDIOS www.kalonstudios.com | studio@kalonstudios.com P.O. Box 39923 | Los Angeles | CA 90039 | 866.514.2034...
- Page 3 ENTIRELY ORIGINAL DESIGN FOR A SUSTAINABLE CULTURE Made with uncompromising craftsmanship by traditional woodworkers in Europe from 100% sustainably-harvested, solid, domestic wood, the Echo Collection is a celebration of craft and contemporary woodworking. The unique character of the natural material is an integral part of the design that will only improve with age and use.
- Page 4 MAINTENANCE, CLEANING AND STORAGE Please take care to periodically check the crib/toddler bed to ensure that it is properly assembled and that no parts have come loose. Verify that the crib toddler bed parts remain fit snuggly against one another and tighten hardware if needed. Clean with a rag dampened with warm water.
- Page 5 PIECES INCLUDED / PIÉCES INCLUSES Refer to pouch for true to life diagram of hardware. Mattress Support ( x1 ) Support de matelas ( x1) Side Panel ( x2 ) Panneau latéral ( x2 ) Conversion Side Rail ( x1 ) Panneau de Conversion ( x1) Side Panel Foot ( x2 ) Panneau inférieur latéral ( x2 )
- Page 6 DETAIL / DÉTAIL 1 DETAIL / DÉTAIL 2 DETAIL / DÉTAIL 3...
- Page 7 STEP 1 • Fully thread parts B into holes along bottom edge of the Side and End Panels. (Detail 1) • Troubleshooting: Sometimes screw inserts can be blocked by small amounts of glue. If you encounter any obstruction when inserting hardware, thread the bolt in and out several times to clear the blockage.
- Page 9 STEP 2 • Insert parts E through holes on outer side of End Panels and End Panel Feet, then into holes on edge of Side Panels and Side Panel Feet. • Use the large Allen Key to loosly tighten parts E. To avoid allignment issues, wait until all panels are attached to fully tighten hardware.
- Page 11 STEP 4 single panel toddler bed conversion • These instructions are for single side panel conversion only and are not for the Echo Conversion Kit. Flip the book for Echo Conversion Kit instructions. • Follow the instructions in Steps 1 and 2 using the Conversion Side Panel in the place of the crib Side Panel.
- Page 12 Securely tighten loose bolts and other fasteners. DO NOT use crib if any parts are missing, damaged or broken. Contact Kalon Studios for replacement parts and instructional literature if needed. DO NOT substitute parts. • If refinishing, use a non-toxic finish specified for children’s products.
- Page 13 CAUTION: Any mattress used in this crib shall be at least 69cm by 131cm with a thickness not exceeding 15cm.