Publicité
Les langues disponibles
Les langues disponibles
When the water level in the tank is too low or at zero, the diffuser stops automatically. To go back to normal operation,
top off the water up by following the « Precautions for use » steps.
You are advised to change the water frequently in the tank and clean the diffuser once or twice a week, particularly
if you want to change the fragrance to be diffused.
1. Turn the appliance off and unplug it.
2. Remove the covers and empty the water on the opposite side of the air outlet. Do not empty the water in the
air outlet, this can damage the diffuser.
3. Clean the diffuser water tank using a soft damp cloth. If needed, use a little white vinegar strongly diluted. Do
not use corrosive detergents. Carefully rub the ceramic disc with a cotton bud being careful not to scratch
it.
-
Input power supply : AC 100-240V, 50/60Hz
-
Output power supply : DC24V 500mA
-
Ceramic disc lifespan: +/- 3000 hours
Correct Disposal of this product. This marking indicates that this product should not be disposed with
other household wastes throughout the EU. To prevent possible harm to the environment or human
health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of
material resources. To return your used device, please use the return and collection systems or contact
the retailer where the product was purchased. They can take this product for environmentally safe
recycling.
All manuals and user guides at all-guides.com
Air outlet
Empty the water in the opposite side of the
air outlet. Do not allow water into the air
outlet, this would damage the diffuser.
TECHINAL SPECIFICATIONS
MAINTENANCE
-
Tank capacity: 200 ml
-
Dimensions (approx) : Ø 15.3 cm x H 15 cm
Recommended for a surface of: 30 m²
Publicité
