Aroma Outfitters 3D Galaxy Ultrasonic Glass Mode D'emploi page 3

1. Insert the adaptor's connector into the DC jack input at the back of the base of the diffuser.
2. Place the diffuser on a flat and stable surface and away from the edge.
3. Remove the diffuser's outer and inner cover.
4. Pour mineral water (bottled or tap water) into the water tank up to the maximum level indicated (200 ml).
5. Add a few drops of essential oils (3-6 drops) or home fragrances (3-7drops) to the water tank.
6. Replace the inner cover and the outer cover on the diffuser.
7. Plug the adaptor into the appropriate outlet.
ON/OFF button – Middle button:
1. Press the ON/OFF button once to turn on the device and start the continuous diffusion (highest mist volume
diffusion: 30 ml/h)
2. Press twice to operate the diffuser for 60 minutes. After these 60 minutes, it will stop automatically.
3. Press a third time to start the cyclic diffusion. The device will operate for 30 seconds and stop for 30 seconds during
120 minutes. After that, the device will automatically stop.
4. Press a fourth time on the ON/OFF button to switch completely the diffuser OFF.
Light button – Right button:
1. Press once to start the color changing ambiance.
2. Press twice to select the color ambiance of your choice
3. Press a third time to turn off the lights.
If you want to use the device as a lamp (and no diffusion) press on the Light button and do not press on the
ON/OFF button.
Mist volume – Left button:
1. Press once to get the middle mist volume diffusion (22 ml/hour)
2. Press a second time to get the lowest mist volume diffusion (15ml/hour)
3. Press a third time to get the highest mist volume diffusion (30 ml/hour)
All manuals and user guides at all-guides.com
PRECAUTIONS FOR USE
How to Operate