Zeck Audio STAC Vision 1.2 Consignes D'utilisation page 7

2.
Always pre-check the store tank for sufficient filling with original STAC
attempt to operate the S T A C
STAC ® Fog Fluid . Our 2 year warranty does not cover any damage that occurs from disre-
garding these particular instructions.
3.
Don't place the unit in a position that is too high above the stage. In contrast to fog from
dry ice, the fog created by the STAC
slight upward tendency. Take care for a free path for the fog, don't place any objects in
front of the fog outlet. By making inventive use of coloured lamps and strobe lights (e.g.
STAC CL 10 light unit) or ventilators, the dramatic effect of the fog can be even more in-
®
creased. Feel free to experiment to make full use of the 7 metres fog range of the STAC
Vision 1.2.
4.
Connect the unit to the mains supply with the supplied mains cord. The included pushbut-
ton is connected to the 'Remote Control' jack on the rear of the unit with the supplied 8 m
cable. After turning the STAC
After this period, the STAC
8
All manuals and user guides at all-guides.com
owner`s manual
Vision 1.2 without or with any other than original
®
Vision 1.2 does not 'stick' to the ground but has a
®
® Vision 1.2 on, give the unit 6 minutes for an initial heatup.
Vision 1.2 is ready for operation.
®
owner`s manual STAC Vision 1.2 © Zeck Audio
Vision 1.2
® Fog Fluid . Never
®