axhess Profi Power Germany 2.440.007 Mode D'emploi page 12

GB
12V
time switch
6 Connecting the time switch
Initial starting.
Before you connect a device to the time switch and before you connect
the time switch to the 12 V current supply,the clock needs to be set.
1. Time Setting
1.1. Press Mode / Cancel KEY once, then press Setting key.
1.2. The Clock mode setting is enable, first two digits of LCD will blink.
1.3. Press the Setting key again for Hour setting.
1.4. Press Go key to confirm the setting, then the last two digits
of LCD will blink.
1.5. Press Setting key again for Minutes setting.
1.6. Press Go key to confirm the setting, the clock setting is finished.
2. Timer Setting
2.1. After Clock setting, press Mode/Cancel key again for selecting
Timer mode.
2.2. Follow the steps from 1.1 to 1.6
2.3. After the Timer setting, press the Mode/Cancel again for
Timer 2 setting.
8
All manuals and user guides at all-guides.com
3. Timer Programming
3.1 Press the Mode/Cancel key to select the Timer mode There are
3 Timer modes to be selected, Timer 1 . Timer 2 and Timer 1 & 2.
3.2 Then press GO to start.
3.3 Continue press the Mode / Cancel for 5 seconds to cancel the
Timer programes.
3.4 Continue press the GO for 5 seconds to enforce starting.
3.5 Continue press Mode/ Cancel for 5 second to terminate the
power output.
4. Sign on LCD
4.1 Timer signal steadily appears on the LCD, means the Timer is
being scheduled.
4.2 Timer signal flashes on LCD, means the Timer is on running now.
GB
12V
time switch
9