Publicité
Les langues disponibles
Les langues disponibles
GB
12V
time switch
- Consequential damage caused by non-intended use and/or a
defective battery.
Handle this device exclusively for its intended use.
Never use in a moisty or wet environment!
Use the device exclusively in a dry environment!
Never handle this device close to inflammable material.
Never handle this device in an explosive hazard environment.
Exclusively use the device when there are sufficient
possibilities for ventilation.
Repairs and maintenance may only be accomplished by
authorized specialists, who are familiar with the dangers/
regulations which go along with this equipment.
Always make sure the equipment is in a safe, solid condition!
Mount the time switch in such a secure way it surely doesn't
collapses or falls down.
The equipment is such a secure way children do not have
access to it! Children do not recognise originating dangers,
neither are they able to estimate them!
Do not directly expose the equipment to sunlicht or other
sources of heat. Avoid additional heating of the device by
outside influences.
To avoid damages to the connecting cables: never pull the
cable but always disconnect by using the plug.
If the connecting cable is damaged the device may not be
4
used any longer!
All manuals and user guides at all-guides.com
First, the device needs to be repaired by an authorized
specialist.
Do not place any inflammable objects like candles on or close
to the device.
No objects filled with liquid, like bottles or drinking cans, may
be placed next to, on, or close to the device.
3. Way of supply
1 x 12 V time switch
1 x Button cell 3 V
1 x Multilingual manual
1 x Recyclable packaging
4. Intended use
Time switches, and therefor also this 12 V version, are developed to au-
tomatically switch on connected devices on a pre-determined moment.
Also, the time switch switches off again a connected device, as well on a
pre-determined moment.
There is one condition for doing so; the time switch needs to be con-
nected to a 12V rated current socket. Settings of the time switch are
being recorded. A supporting battery (exchangeable) inside the time
switch makes sure all data is being saved when the time switch doesn't
receive any 12 V voltage from the car battery. Set data is being conser-
ved. This time switch is developed for the use in combination with 12 V
vehicle batteries. Other voltages will disturb the 12 V time switch, do not
connect to any other voltage!
The maximal output is 10 A. Connecting devices with a power con-
sumption from 12 V/10 A up to 120 W at the upmost can be used with
this time switch.
GB
12V
time switch
5
Publicité
