Qilive Q.3622 Guide De Démarrage Rapide page 7

1. Attach the support arm to the printer.
2. Thread the filament into the filament guide tube
3. Load the filament into the printer head
4. Insert the SD cart into the SD card reader (press to lock the card into the reader) and start
calibration of the platform as described in chapter 6 of the instructions
5. Print a test object on the SD card
a/ Press the selection button to display the menu
b/ Turn the selection button until "Card Menu" is selected
c/ Press the selection button to see the files available for printing on the SD card
d/ Turn the button to select the file you wish to print
e/ Press the selection button to start printing
WARNING: Wait until the printing platform has cooled before removing the printed object
3.2 COUNTER CLOCKWISE
Unroll the filament in this direction
3.3 LOCKING BRACKETS
REMOVE THE TWO LOCKING BRACKETS BEFORE TURNING ON THE PRINTER
All manuals and user guides at all-guides.com
7
EN