DeWalt DW030PL-XJ Mode D'emploi page 4

Operation
GB
1.
Point the laser at the top of the tool (Figure A #1)
toward the wall whose distance you need to measure
(Figure #1).
C
2.
Click (Figure
display a laser dot on the wall (Figure
3.
When the bottom of the tool is positioned at the
correct distance from the wall, click
measurement (Figure
4.
View the measurement on the display window
(Figure #2).
D
Changing the Unit of Measure
Once the current measurement is taken, you can change
the unit of measure from decimal ft (6.21 ft) to fractional
ft (6'02"9/16), fractional ft to meters (1.894 m), meters to
inches (74 9/16 in), or inches to decimal ft.
To change the unit of measurement, press and hold
until you see the measurement change (2-3 seconds).
NOTE: If you continue to hold
changes, the tool will turn off.
Re-measuring
If you need to take a new measu ement, click
• The previous measurement (Figure
cleared from the display window.
• When you are ready to take the new measurement,
click .
Turning Off the Tool
The tool can be turned off in either of these ways:
• After taking a measurement, press and hold
5 seconds (until the display window clears).
• If you do not use the tool for 45 seconds, it will
automatically turn off.
4
All manuals and user guides at all-guides.com
#3) to turn the tool on and
A
#1).
C
to take the
#2).
C
after the measurement
#2) will be
D
Three Year Limited Warranty
DeWALT will repair, without charge, any defects due to
faulty materials or workmanship for three years from
the date of purchase. This warranty does not cover part
failure due to normal wear or tool abuse. For further detail
of warranty coverage and warranty repair information,
visit www.DeWALT.com or call 1–800–4-DeWALT
(1–800–433–9258).This warranty does not apply to
accessories or damage caused where repairs have been
made or attempted by others. This warranty gives you
specific legal rights and you may have other rights which
vary in certain states or provinces.
In addition to the warranty, DeWALT tools are covered
by our:
1 YEAR FREE SERVICE
DeWALT will maintain the tool and replace worn parts
caused by normal use, for free, any time during the first
year after purchase.
90 DAY MONEY BACK GUARANTEE
If you are not completely satisfied with the performance of
your DeWALT Power Tool, Laser, or Nailer for any reason,
you can return it within 90 days from the date of purchase
with a receipt for a full refund - no questions asked.
.
RECONDITIONED PRODUCT: Reconditioned product
is covered under the 1 Year Free Service Warranty. The
90 Day Money Back Guarantee and the Three Year
Limited Warranty do not apply to reconditioned product.
FREE WARNING LABEL REPLACEMENT: If your
warning labels become illegible or are missing, call
1-800-4-DeWALT or visit your local service center for
a free replacement.
for