Genie LP21 Mode D'emploi page 28

5. SLIDER SWITCH FEATURES
1. OFF P NP Printer Selects Switch
OFF Turn OFF the calculator.
P Printer is activated as long as calculator is turned on.
NP Printer is activated only when feed key or non-add/date key is pressed.
2. ↓ ↓ ↓ ↓ 5/4 ↑ ↑ ↑ ↑
Rounding Switch
↓ ↓ ↓ ↓
Absolute round down.
5/4 Final result is rounded up if the 1
and rounded down if the 1
↑ ↑ ↑ ↑
Absolute round up.
3. A 0 2 3 4 F Decimal Point Selector
A Add mode. The decimal point is automatically placed before the last two
digits in addition and subtraction.
0,2,3,4 For multiplication and division, decimal point is set to the result of calculation.
For addition and subtraction, decimal point is set to all entries. To all the
results, number in the decimal place to the last decimal place designated will
be rounded. For example, number at 3
position.
F Automatic floating point for decimally accurate computing. Decimal
point is entered at desired position and the decimal point is
automatically shifted to the right is under 12 digits of integer.
4. • • • •
F-Cal Financial Calculation Switch
• • • •
Calculation without F-Cal
F-Cal Memory Total key change to Amount key
Memory Subtotal key change to Interest key
Memory Subtraction key change to Months key
Memory Addition key change to Payment key
5. • • • •
GT Grand Total Switch
• • • •
Calculation without Grand Total
GT Final results of additions and subtractions are automatically accumulated in
the GT memory according to sign. The GT memory can be recalled by
pressing the [GT] key.
All manuals and user guides at all-guides.com
st
digit not to be printed is 4 or less.
28
st
digit not to be printed is 5 or more
rd
decimal place is rounded at "2"