Adjusting The Brightness; Using The Monitor (Not Supplied); Attaching The Monitor - Sony VCL-FS2K Mode D'emploi

Adjusting the brightness

Some video camera recorders' filters are automatically activated and the recorded
picture may appear odd.
In this case, adjust the brightness manually.
(1) Set the video camera recorder in the manual adjustment mode.
(2) Set in the mode that the brightness can be adjusted.
Set it to the brightest side.
(3) Set in the mode that the shutter speed can be adjusted.
Set it to normal speed (1/60) then change it to a faster mode and adjust the
brightness.
• Some video camera recorders cannnot be adjusted manually for brightness and for the
shutter speed. In this case, adjust only the functions which are manually adjustable.
• You can adjust the brightness using a filter (not supplied). Use a filter that fits your
video camera recorder and attach it to the video camera recorder. The optional Sony
VF-37M, VF-52MA ND filters are recommended. For the filter for the telescope, use
the screw type filter (size 67 mm (2

Using the monitor (not supplied)

When it is difficult to find the subject with the monochrome viewfinder, we recommend
use of an LCD color monitor with attached to the accessory shoe (supplied). You can
view the picture being recorded on the monitor and avoid a shaky picture caused by
vibration. The optional Sony XV-M30/M30E monitor is recommended.

Attaching the monitor

(1) Attach the accessory shoe to the accessory shoe attachment hole on the
pedestal.
(2) Attach the monitor to the monitor attachment of the accessory shoe.
1
Accessory shoe
attachment hole
12
-EN
3
/ inches), P=0.75) (not supplied).
4
2
Monitor
attachment