Ickle Bubba Eclipse Travel System Mode D'emploi page 10

Step 3: Front Wheel Installation
a. Fit the front wheel pin into the
hole located in the front wheel
housing, located on the underside
of the front of the pram frame.
Step 4: Removing the Front Wheels
a. Press the metal clip located on
the inner edge of the front wheel
housing.
All manuals and user guides at all-guides.com
Set Up & Assembly
b. Repeat the process with the
other side, and ensure both
wheels are locked in place before
use.
b. Once engaged, pull the wheel
downwards to remove.