Publicité
Les langues disponibles
Les langues disponibles
ENGLISH
They produce good results for certain types of usage only. If you are using this type of
•
detergentes, you need to contact the manufacturers and find out about the suitable
conditions of use.
When the conditions of use of such products and the machine settings are appropriate,
•
they ensure savings in salt and/or rinse aid consumption.
Contact the detergente manufacturers if you are not obtaining good wash results (if your
•
dishes stay calcareous and wet) after having used 2 in 1 or 3 in 1 detergentes. The scope of
warranty for your machine does not cover any complaints caused by the use of these types
of detergentes.
Recommended usage: If you want to obtain better results while using combined detergentes,
add salt and rinse aid into your machine and adjust the water hardness setting and the rinse aid
setting to the lowest position.
Solubility of the tablet detergentes produced by different companies can vary depending
on the temperature and time. Therefore, it is not recommended to use such detergentes
in short programs. It is more suitable to use powder detergentes in such programs.
Warning: Should any problem, which you have not encountered before, arise with the use of
this type of detergentes, contact the detergente manufacturers directly.
When you give up using combined detergentes
Fill the salt and rinse aid compartments.
•
Adjust the water hardness setting to the highest position and run an empty-wash.
•
Adjust the water hardness level.
•
Make the suitable rinse aid setting.
•
aid.
The rinse aid level adjuster can be set to a position between 1 and 6. Factory setting for rinse
aid is the position 3.
You need to increase the degree of the adjuster if water stains form on your dishes after
a wash, whereas you need to decrease the degree if a blue stain is left when wiped by
hand.3
All manuals and user guides at all-guides.com
Filling with rinse aid and making the setting.
Rinse aid is used to prevent the stay of
white water drops, lime stains, white
film strip-shaped stains that may form
on the dishes, as well as to increase
the drying performance. Contrary to
the popular beliefs, it is used not only
for obtaining shinier dishes but also for
obtaining sufficiently dried dishes. For
this reason, care should be taken that
there is adequate amount of rinse aid
in the rinse aid compartment and only
polishing material produced for use at dishwashers should be used.
To put rinse aid, remove the rinse aid compartment cap by turning
Fill the rinse aid compartment with rinse aid until the rinse aid level
indicator becomes
dark;2
way that the nails will correspond to one another. By checking the
rinse aid level indicator on the detergente dispenser, you can
understand whether or not your machine needs rinse aid. A dark
indicator
b
means that there is rinse aid in the compartment, while a
light indicator
a
shows that you need to fill the compartment with rinse
19
refit the cap and close it by turning it in a
it.1
Publicité
