Publicité
Les langues disponibles
Les langues disponibles
EN
8.2
START THE MACHINE
1. Install the battery pack into the machine.
2. Pull the lock-out button (1) upward.
3. Press the trigger (2).
8.3
STOP THE MACHINE
1. Release the trigger to stop the machine.
8.4
DELIMBING A TREE
B
A
Make sure that there is nothing or nobody in the area where
the branches fall.
•
Stand opposite the branch you will cut.
•
Start to cut the higher branches.
•
Then cut the lower branches.
•
Cut downwards to prevent the bar from jamming.
8.5
LIMB TREE BRANCHES
Limbing is to remove the branches from a fallen tree.
WARNING
English
1. Keep the larger lower branches to hold the log off the
ground.
2. Remove the small limbs in one cut.
3. Limb the branches with tension from the bottom to up.
4. Keep the larger lower branches as a support until the log
is limbed.
9
MAINTENANCE
Do not let brake fluids, gasoline, petroleum-based materials
touch the plastic parts. Chemicals can cause damage to the
plastic, and make the plastic unserviceable.
Do not use strong solvents or detergents on the plastic
housing or components.
Remove the battery pack from the machine before
maintenance.
9.1
ADJUST THE CHAIN TENSION
Wear protective gloves if you touch the chain, bar or areas
around the chain.
1. Loosen the chain cover by turning the bar nut
counterclockwise.
10
A
A
CAUTION
CAUTION
WARNING
CAUTION
Publicité
