Remington BV12199A Mode D'emploi page 14

10 |
Chapter 4: Blower/Vac Operation
Emptying the Vacuum Bag
1. Turn vacuum off and unplug power
cord.
2. Press locking lever on vacuum tube
adapter and remove tube adapter as-
sembly from blower/vac (see Figures
4-11 and 4-12).
3. Depress locking button on vacuum
bag adapter and remove from blower/
vac housing (see Figure 4-9).
4. Unzip vacuum bag and shake out
contents (see Figure 4-10).
5. Zip the vacuum bag closed and
reassemble vacuum bag adapter to
blower/vac housing.
6. Replace vacuum tube adapter assem-
bly.
Figure 4-9: Removing bag/adapter assembly
Figure 4-10: Unzipping and emptying bag
All manuals and user guides at all-guides.com
Removing Clogged Debris
from the Impeller
1. Turn vacuum off and unplug power
cord.
2. Press locking lever on vacuum tube
adapter and remove tube adapter as-
sembly from blower/vac (see Figures
4-11 and 4-12).
3. Check the impeller for clogged debris
and any signs of damage. Carefully
remove debris from impellers (see
Figure 4-13).
4. Replace vacuum tube adapter assem-
bly.
Figure 4-11: Pressing locking lever
Figure 4-12: Removing vacuum tube adapter
Figure 4-13: Removing debris from impellers
118034