Airworks FFH2 Mode D'emploi page 5

Be sure to plug into a 120V AC, 60Hz outlet.
Your heater is equipped with a 4-position control switch:
1. Set the control switch to for fast warm up of a room. Once the room is
comfortable, select to reduce electrical consumption and to prevent the room
from becoming too warm
2. Pilot Light: This fan heater is equipped with a pilot light, which glows when the
heater is working.
Safety Features of the Heater:
1. Thermal Fuse: In the event that the unit reaches extremely high
temperatures, the heater's fuse will shut off permanently. Should this occur,
bring the heater to a certified electrician to examine.
2. Thermal Cut-Off: In the event of overheating, the heater will automatically
shut off. To reset, turn off or unplug the heater to allow for cooling for about 5
minutes. The most common cause of overheating is collection of dust.
FFH2 Airworks Fan Forced
GETTING TO KNOW YOUR HEATER
OPERATING INSTRUCTIONS
Parts of the
heater
1. Safety grille
2. Pilot light
3. Power control
1 Symbols
2
3
Power Off
Fan Only
LO heat setting
HI heat setting
5