Télécharger Imprimer la page

Safco Value Sorter 7121 Instructions D'installation page 4

Publicité

9
Carefully fold a K Corrugated Divider in half (Hint:
if the folded edge is not well-formed, try folding it
in the other direction). Slide the Divider into the
slots in the Shelves, pressing firmly until the
Divider is flush with the Shelves.
Repeat with the remaining Dividers.
11
Grooves have been provided in the L Trim Strips
to hold paper labels from the M ID Label Sheet.
After separating along the perforations, insert the
label into the bottom groove and, holding the label
in place, run your fingernail across the label into
the top groove.
GROOVES
7121-37: 4 of 4; Rev. 7; 07/02
All manuals and user guides at all-guides.com
K
M
L
Safco Products Company, New Hope, MN 55428
10
Lay a L Plastic Trim Strip flat against the edge
of a Shelf, with the long leg of the Strip on the
TOP of the Shelf. Press firmly into place along
the length of the Strip.
Repeat for all Shelves.
Set the unit upright.
L
Value Sorter organizers are
also available in 24- and
72-compartment sizes.
Model 7111
24-Compartment
Value Sorter
Organizer
Model 7131
72-Compartment
Value Sorter
Organizer

Publicité

loading