Publicité
Model No.: SF-1315
Vertical frame x4
750 mm Steel
panel x3
Socket cap
L
R
M
screw
A
B
Flat
head
screw
1. * Fix the L connector to the inside of frame A with a screw.
* Fix the R connector to the left side and M connector to
the right side of frame B with a flat screw.
* Fix the connectors to the frame C in the same order as
the frame B.
* Fix the R connector to the inside of frame D with a screw.
Causion:
* L connector for left side
* R connector for right side
* M connectors for extention only
3. Press one side corner into the frame and then others,
pat the panel corner in one by one.
All manuals and user guides at all-guides.com
Assembly Instructions
M connector x8
L connector x4
R connector x8
375 mm Steel
Flat head screw X8
panel x10
R
M
R
Socket cap
screw
C
D
Flat
head
screw
R connector x4
M4 Hex screwdriver X1
Socket cap screw X8
2. Attach the horizontal tube to the connector and
then rotate it by 90 degrees by hand.
Causion:
*Make sure that the concave holes on both
sides of the horizontal tube are facing up.
*Make sure that screw holes of horizontal
tube 750 mm are facing inward.
4. Insert rubber stoppers for 750 mm floor
panels by hand into horizontal tubes.
Rubber
stopper x8
375 mm Horizontal tube x8
750 mm Horizontal tube x4
Publicité
