Publicité
Les langues disponibles
Les langues disponibles
®
VTT
method
®
VTT
sensor
Ref :
472 056
ENGLISH
1 Description
The VTT sensor has two function modes. With it, one can measure or
monitor:
arterial blood pressure in an armband-type blood pressure
-
monitor.
pressure variations in the armband-type monitor.
-
One can change the function mode with the selector on the front side of the
sensor.
If the selector is turned to the right, the sensor is in the "variations" mode; if
the selector is turned to the left, the sensor is in the "measurement" mode.
The sensor comes with a valve and a flexible hose so that one can connect
the sensor to the armband-type monitor (not included).
2 Technical specifications
2 gauges:
"blood pressure" measurement
"variations" measurement
th
Resolution:
1/1000
of the full scale
Scale:
0 to 200 mmHg in the "blood pressure" measurement mode
+/- 5 mmHg in the "variations" measurement mode
3 Assembly
Connect the sensor to the armband monitor with the flexible tube, and then
the bulb to the armband monitor with the Y-connector.
The valve supplied allows you to control the deflation of the armband more
effectively than by deflating it with the knurled knob on the bulb.
4 Use
4.1 Interfaces
This sensor works with either the VTT
4.2 Connecting the sensor to the VTT
The sensor is connected with the connector located on the back of the case:
•
Align the sensor with the chosen measurement port,
•
Plug the sensor into the socket on the console,
•
Follow the connection system on the VTT
•
Plug in securely.
5
®
or the ESAO PRIMO console.
®
console
®
console,
Publicité
