Kohler K-1843 Guide D'installation page 4

Side View
Fastener
2. Reinforce the Stud Pocket
IMPORTANT! Before attaching the studs to the framing, ensure it is not warped, is vertically level, and is
of equal length of the existing studs.
Using fasteners, attach studs to the outside of the framing at the determined unit placement. This
will create the stud pocket.
Verify the front surface of the studs are flush with one another. Plane the studs, if necessary.
1071449-2-B
All manuals and user guides at all-guides.com
Stud Pocket
Confirm studs are
vertically level.
4
Attach studs to outside
of determined location
with fasteners.
Kohler Co.