Prokonian SP2315-IR-PHRM Manuel D'instruction page 6

OPERATING INSTRUCTIONS
Power Switch
I
• Press this button into the "I" position for main power of the unit.
O
Flame Button
• This button controls the brightness of the flame effect with settings at High, Medium and Low. When the
log set is first turned on, the flame will come on at the highest setting. Each time the Flame button is
pressed, the brightness decreases. The only way to turn off the flame effect completely is to turn off the
Power switch.
Heater Button
• Pressing the Heater button to turn on or turn off the heater, when turn on the heater each time, heater
will be turn on at least one minute, when the ambient temperature is higher than the set temperature,
heat will turn off automatically.
Adjustable Thermal Control
• To adjust the temperature to your individual requirements, turn the thermostat dial to the right
(clockwise) to increase the temperature and to the left to decrease the temperature. This thermostat
control dial can only be used while the power switch are in "I" position and heater need turned on. When
the heater reaches the desired temperature, the heat will turn off. When the temperature dropped below
the selected temperature, heat will restart again.
All manuals and user guides at all-guides.com
I
O
5