Trevi RC 829 Manuel D'utilisation page 4

ENGLISH
TOOLTIP
1. AUTO/ON/OFF selector, radio on/off /
alarm activation
2. BUZZ/VOLUME control
3. Alarm indicator
4. LED display
5. TIME button, time adjustment
6. ALARM button, alarm adjustment
7. SLEEP button, scheduled shutdown
8. SNOOZE button, temporary alarm off
9. AL.OFF button, alarm on/off
10. HOUR button, increase in hours
11. MIN button, increase in minutes
12. AM/FM selector
13. Tuning control
14. Backup battery compartment
POWER SUPPLY
Plug the cord into any 230V-50Hz AC home
outlet. The entire display (4) will flash until
the time won't set.
CLOCK SETTING
1. Press and hold the TIME button (5) and
simultaneously press the HOUR key (10)
to set the hour.
2. Press and hold the TIME button (5) and
simultaneously press the MIN key (11) to
set the minutes.
RADIO
1. Move the AUTO/ON/OFF (1) selector to
ON to switch on the radio.
2. Adjust the volume using the
BUZZ/VOLUME control (2).
3. Select the desired modulation using the
AM/FM selector (12).
4. Tune to the radio station using the
tuning control (13).
ALARM SETTING
1. Press and hold the ALARM button (6)
and simultaneously press the HOUR
button (10) to set the hour of alarm.
2. Press and hold the ALARM button (6)
and simultaneously press the MIN
button (11) to set the minutes of alarm.
RADIO ALARM
1. Tune to the radio station and adjust the
volume as described in section RADIO.
2. Move the AUTO/ON/OFF (1) selector to
AUTO position to activate the alarm. The
display will turn on the alarm indicator
(3).
4_
All manuals and user guides at all-guides.com
ALARM WITH BUZZER
1. Move the BUZZ/VOLUME control (2) on
2. Move the AUTO/ON/OFF (1) selector to
SNOOZE FUNCTION AND DISABLE
ALARM
1. During the alarm sound, press the
2. During the alarm sound, press the
3. Move the AUTO/ON/OFF selector (1) to
SLEEP FUNCTION
The SLEEP button (7) allows to program to
turn off the radio for up to 1 hour and 59
minutes. This adjustment is carried out with
the radio off.
1. Move the AUTO/ON/OFF (1) selector to
2. Press and hold the SLEEP button (7) and
3. Press and hold the SLEEP button (7) and
4. Press the SNOOZE button (8) to switch
BATTERY BACK-UP
To keep the clock function and alarm
recording even during a momentary man,
lacking electricity, insert a 9V battery into
the battery compartment (14) on the
bottom of the appliance. We considered the
pre-replace this battery every 6 months.
If in case of interruption of the electrical
appliance on a monsters wrong time and
flashing replace the 9V battery.
TECHNICAL CHARACTERISTICS
Power Supply: ............................AC 230V-50Hz
Power consumption: ...............5W
BUZZ.
AUTO position to activate the alarm. The
display will turn on the alarm indicator
(3).
SNOOZE button (8) to temporarily stop
the alarm. After 9 minutes the alarm will
continue to sound.
AL.OFF button (9) to stop the alarm. The
alarm will remain active and will play 24
hours later.
the OFF position to turn off the alarm.
The display will turn off the alarm indi-
cator (3).
OFF.
simultaneously press the HOUR key (10)
to set the hour.
simultaneously press the MIN key (11) to
set the minutes.
off the function SLEEP prematurely.
RC 829