TrekStor MovieStation maxi t.u Manuel D'utilisation page 20

11) Troubleshooting
All manuals and user guides at all-guides.com
I have connected the MovieStation to my television or my HiFi system.
Why is no picture showing on my television or no sound coming from
my HiFi system?
EN
This problem may have several causes. Please check the following items:
1) Please check that you have connected the correct cable for the output of
the video and audio signals. Information on the correct connection of the
MovieStation to your home entertainment system can be found in section
"8) c
2) If you have correctly connected the MovieStation, it is possible that it may
be in an incorrect video mode. To select a different mode, press the "tv-o
button until the picture is correctly displayed on your television. Please be
patient during the search for the correct video mode.
3) Please ensure that you have selected the correct AV source on your television set.
I have changed the settings of the MovieStation in "A
or "g
enerAl settings
Select the menu item "f
t s
tHe reK tor
The saved files are not deleted when you do this.
While using the MovieStation, it no longer responds to my commands.
This problem may have several causes. Please check the following items:
1) Please aim the remote control in the direction of the MovieStation so that
direct visual contact between these two devices exists and ensure that the
infrared receiver of the remote control or the MovieStation is not covered.
2) Check the capacity of the batteries in the remote control and, if necessary,
replace them with new ones.
I would like to display picture files with the MovieStation. Some files
take a very long time to load.
Depending on the resolution, the pictures have varying file sizes. The larger the
picture, the longer the resizing of the pictures takes. Solution: Reduce the pictures
with your photo processing program to a resolution of approx. 800 x 600 pixels.
Some picture files that I previously copied to the MovieStation, are not
listed in the folder navigation.
You can only display picture files in JPEG format with the MovieStation. Files of
other file types are not listed in the folder navigation.
I start a video file, but no correct picture or no correct sound is played.
Please note that only video files from the following formats can be played:
MPEG-1 (VCD), MPEG-2 (SVCD/KVCD), DVD (IFO/VOB), DivX 3 (to 720 x 400),
DivX 5 (to 720 x 400), XviD
If you encounter problems while playing your video files, please check the utilized
audio and video formats. You may, for example, use the free software GSpot
(http://gspot.headbands.com/).
t s
onnecting tHe reK tor
", and would like to restore the factory settings.
Actory setuP
M s ". This will restore the factory settings of the MovieStation.
ovie tAtion
M s
ovie tAtion witH tHe HoMe entertAinMent systeM
" as described in section "10) c
– 20 –
. "
ut
/ V
udio ideo settings
onfigurAtion of
"
"