TrekStor MovieStation maxi t.u Manuel D'utilisation page 19

10) Configuration of the TrekStor
All manuals and user guides at all-guides.com
To open the configuration mode of the MovieStation, press the "s
Re-press the "s " button to exit the configuration
etuP
In this mode, you can undertake audio / video settings (Audio / Video settings)
and general system settings (General settings).
Press the or button to change to the next or previous menu item. To go to
W U
a submenu, press the
would like to change a setting, press the
menu item is selected.
• audio / Video settings:
TV mode: Under the menu item "tv
color transfer system.
Screen: Under the menu item "s
modes (4:3 Letter box, 4:3 Pan&Scan, 16:9 Letterbox, 16:9 Pan&Scan).
TV out: Under the menu item "tv
of the MovieStation. You have the choice between a composite video
signal and HDTV video signals of differing qualities.
• General settings:
Language: Under the menu item "l
language of the MovieStation.
Skip interval: Under the menu item "s
for the gradual fast-forwarding of videos.
Slide show: Under the menu item "s
is displayed during a slide show.
Factory setup: Under the menu item "f
original settings of the MovieStation. The files saved on your hard disk are
not deleted when you do this.
Firmware update: Under the menu item "f
the MovieStation with the most current firmware from the internet. Please
follow the following steps:
a) Download the firmware (*.zip-file) from the TekStor website www.trekstor.de
and unzip it in the folder of your choice.
b) Copy the unzipped BIN file in the main directory of the MovieStation.
c) Connect the MovieStation with the home entertainment system and
while in configuration mode select the menu item "f
d) Confirm the question "s
e) Subsequently follow the instructions of the MovieStation.
button. To exit a submenu, press the
V
Mode
creen
out
AnguAge
KiP intervAl
lide sHow
tArt tHe firMwAre uPdAte
MovieStation
button when the corresponding
A
", you can select NTSC or PAL as the
", you can select from 4 presentation
", you can set the video output signal
", you can select the menu
", you can select the increment
", you can set how long a picture
", you can restore the
Actory setuP
irMwAre uPdAte
?" with "y
– 19 –
" button.
etuP
button. If you
X
", you can update
".
irMwAre uPdAte
".
es
EN