Axis Communications 212 PTZ Guide D'installation page 10

Page 10
Other methods of setting the IP address
This table shows alternative methods for setting or discovering the IP address.
Installation
UPnP™,
Bonjour,
AXIS Internet Dynamic DNS
Service,
Setting the IP address with ARP/
Ping,
View DHCP server
admin pages for IP address
(See note below)
Notes:
• UPnP™, DHCP and Bonjour are enabled by default in the AXIS 212 PTZ/AXIS 212 PTZ-V.
• The AXIS 212 PTZ/AXIS 212 PTZ-V has the default IP address 192.168.0.90
• To view the admin pages for the DHCP server, please see the server's own documentation. You may
need to contact your network administrator.
• If setting the IP address fails, check that there is no firewall blocking the operation.
• AXIS Dynamic DNS Service requires an Internet connection without an HTTP proxy.
• Bonjour - applicable only in browsers with support for Bonjour, for example, Safari.
UPnP™
™
UPnP functionality is enabled by default in the AXIS 212 PTZ/AXIS 212 PTZ-V. If enabled
on your computer as well (Windows ME or XP), the camera will automatically be detected
and a new icon is added to "My Network Places." Click this icon to access AXIS 212 PTZ/
AXIS 212 PTZ-V. See also page 13 for instructions on how to set the password.
Note that you must install AXIS 212 PTZ/AXIS 212 PTZ-V on the same network segment
(physical subnet) as the computer handling the installation.
Notes:
To install the UPnP™ service on your computer, open the Control Panel from the Start Menu and select Add/
Remove Programs. Select Add/Remove Windows Components and open the Networking Services section.
Click Details and then select UPnP as the service to add.
Get user manuals: See SafeManuals.com
DHCP Server
Requirements
in network
Optional
Optional
Required
UPnP™ is a certification mark of the UPnP
AXIS 212 PTZ/ AXIS 212 PTZ-V Installation Guide
Operating system
Windows (ME or XP)
Mac OSX (10.4 or
later)
All
All
All
™
Implementers Corporation.
Recommended
method for:
Macintosh