iTaste CLK! Manuel D'utilisation page 9

PLEASE NOTE:
The Red LED will blink for eight seconds when battery capacity is lower than 3.3V and the
iTaste CLK! will automatically power off.
If a load short circuit is detected the Red LED light will stay lit for five seconds, after which
no vapor will be produced. If the RED light remains lit for more than five seconds, and your
device is within the 3 month warranty period, please contact your authorized Innokin
vendor for warranty details.
When the iTaste CLK! battery is fully charged the LED light on the firing button will turn
green and power off.
13/EN-13
All manuals and user guides at all-guides.com
Technical Specifications:
Variable Voltage
The rotational wheel adjusts voltage in the following increments:
3.5, 3.8, 4.0, 4.3, 4.5, 4.8, 5.0
The red LED will blink six times and turn off if the rotational wheel is not in place.
To set your desired voltage turn the rotational wheel to the left or right until you hear an
audible click.
When adjusting the voltage with the rotational wheel always check to ensure the wheel is
set to your desired voltage.
tandby current: 50uA max
Maximum output current：3.0A
Maximum output wattage：9.5W
Clearomizer Resistance: 1.2 ohm (minimum), recommendation 2.5Ohm
SBattery: Built-in 800 mAh polymer Li-Ion rechargeable battery.
14/EN-14